WE HAVE VARIOUS HEIGHTS (FROM 300mm - 900mm). WE HAVE VARIOUS LENGTHS (FROM 300mm - 3000mm). WE HAVE VARIOUS PANEL TYPES. TYPE 11 (K1) - SINGLE PANEL SINGLE CONVECTOR. TYPE 21 (P+) - DOUBLE PANEL SINGLE CONVECTOR.
TYPE 22 (K2) - DOUBLE PANEL DOUBLE CONVECTOR. FACTORY FITTED TOP GRILLES AND SIDE PANELS. HIGH QUALITY FINISH - WHITE ENAMEL (RAL 9016).
COMPREHENSIVE RANGE - OVER 210 SIZES & OUTPUTS. OPERATING PRESSURE 10BAR TESTED TO 13 BAR / 1881PSI. MAXIMUM OPERATING TEMPERATURE 120 DEGREE C. Our collection of radiators will enhance any home with space saving classic elegance and efficiency.Comprising over 210 sizes, they are manufactured using the latest state-of-the art technology ensuring maximum efficiency. Internally welded with a final coating of white enamel (RAL9016). Each radiator is degreased and zinc phosphated before being coated with water-based cathophoratic paint. The final coat is applied using an epoxy polyester electrostatic powder coating system that is baked to a hard finish. You also have the protection of the mfr Guarantee against faulty manufacture which lasts for 10 years. All radiators come complete with factory fitted top grille and side panels. Each compact radiator has 4 x ½ connections as standard. ¾ valve adapters are available, which provides a ¾ inch connector option to the valve without reducing performance. Our radiators are suitable for two pipe installations.
For single pipe applications, it is advisable to use diversion tees in the pipework. As this will assist in obtaining design performance from the radiators. Everything required for installation can be found within the robust packaging. Brackets are of a strong design, with open top and deep slots, which facilitates easy and secure installation.
Plastic inserts seat the radiator precisely on the bracket minimizing expansion and contraction noise. The neat nickel-plated plug and vent provide a watertight joint, whilst complementing the superior finish.The brackets supplied can be used to mount the radiators at a pipe hole centre off the wall at 2 different values. Depending on the orientation of the bracket. For K1 (Type 11) and P+ (Type 21) Radiators they are 53mm and 63mm from wall to pipe centre. For K2 (Type 22) Radiators they are 85mm and 95mm from wall to pipe centre. You may find you have some amount of movement in your existing pipework. But please ensure you do not over bend any existing pipework when fitting a replacement radiator to existing pipework. Each radiator comes packed with robust plastic corner protection pieces, bubble wrapped, polythene sealed, labelled inside the polythene for easy identification. The item "CENTRAL HEATING RADIATOR K2 TYPE 22 double panel double convector 600 x 3000" is in sale since Saturday, April 14, 2018.
This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners & Heaters\Radiators". The seller is "kitchens-bathrooms-radiators" and is located in Westhoughton. This item can't be shipped, the buyer must pick up the item.