Modern Thermostatic Radiator Valves Pair Angled TRV Cascade Hot Flow
Hot Flow - Radiator Valve Specialists. Don't Forget The Pipe Covers!
Cascade Angled Modern TRV Thermostatic Radiator Valve (Pair). Each pair of angled valves is made up of one thermostatic radiator valve and one lock-shield. The lock-shield valve is used to balance your heating system and the thermostatic head is used to regulate the room temperature. Numbered 1 to 5 you have easy control over the room temperature, ranging from 7°C to 28°C.
Additionally there is a frost protection feature, so when the control head is turned fully clockwise (off), this allows the valve to open if the temperature falls below 7°C, preventing pipes from freezing in cold weather. We also provide a decorator's cap and full installation instructions for further convenience. These thermostatic radiator valves are designed and manufactured to a high standard both mechanically and aesthetically. The valve bodies are cast from brass, with a smooth polished finish, heavier than similar designs to give a cleaner line that matches the diameter of the truncated compression nut.The head of the TRV is a sensitive liquid sensor and the cover caps on the lock-shield are brass, as opposed to plastic, so they will never break and stay looking as good as new for years and years. Whilst we always recommend all TRVs are installed on the flow, rather than the return pipework of a radiator, this thermostatic valve is designed to be bidirectional and can be installed on either the flow or return, in any orientation. All systems are now supposed to be fitted with an automatic bypass valve to comply with statutory regulation, which will deal with excessive fluid velocity and avoid radiator hammer, once set correctly.
An automatic bypass valve MUST be fitted as part of any TRV installation to allow them to become bidirectional. The Anthracite radiator valve and White thermostatic radiator valve have have become very popular.
Angled Thermostatic radiator valve pair. To Fit 15mm pipework, 1/2 inch fitting to Radiator. White, Chrome, Anthracite, Antique Brass, Satin Nickel, Matte Metallic Grey, Gloss Metallic Grey, Grey and Textured Black. Frost Protection - Decorator's caps are used to fully isolate TRV valves, whilst a radiator is removed for decorating. Pipe Sleeve/Shroud/Cover Bundle Options - Valve Dimensions (mm): H130xW70xD40 - Sleeve Dimensions (mm): H130xW44xD44. 6 Pack Bundles: Includes 6 Wheelheads, 6 Lockshields & 6 Decorator's Caps. Head Thread is M30 x 1.5 so the TRV body can fit most Smart TRV heads. It is your responsibility as the customer to ensure goods are adequately packed / wrapped. You may be liable should the goods arrive to us damaged, as a result of what we deem to be insufficient packaging. Be undamaged, complete and in re-saleable condition.Not have been installed, attached to a water or heating system or used in anyway. You send the items on a signed for service, so you can ensure they have arrived back with us. We will not be held responsible for any late deliveries or short deliveries. We advise that you do not book an installer until your have received and inspected your goods.
Orders are despatched Monday to Friday, except on UK bank holidays.